Parker Hannifin VIX500IM Manuel d'utilisateur télécharger pdf (Page 153)

146 VIX IM MICROSTEPPER INDEXER DRIVE USER GUIDE

LSEL

Label Select

Syntax aLSELon/off(code,inputs,execution,type)

Description

The label select command allows the code following a label having the name

Lnn (where nn is the detected input code) to be performed when a certain

user input pattern is detected on a number of inputs in the range 1 to 5. The

code can be continuously repeated or may be re-triggered, depending upon

the command’s execution parameter setting. The optional parameter ‘type’

specifies which inputs are to be tested; internal or fieldbus inputs.

The controller supports up to 16 user-defined subroutine labels, requiring 5

inputs to be able to select any 1 of the 16. You must declare each label

before you use it. For example:

1DECLARE(L1)

1L1:

code goes here

1END

16 subroutine labels may be numbered in the range L1 to L31 if they are to

be executed using the LSEL command.

IMPORTANT: The drive will need to use all of its inputs to select from the

complete range of 16 labels unless a field-bus input-module is used.

Properties

Immediate or buffered, can be used in labelled block, saved by SV

Parameter Range

On 1

Off 0 (default setting)

Code 0 BCD

1 binary (default setting)

Inputs 1 to 5 (default of 5)

Execution 0 continuously repeated

(default setting)

1 re-triggered

Type (optional) Reserved

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 217 218

Pas de commentaire

Parker Hannifin VIX500IM Manuel d'utilisateur Page 153